What amp to use
Thread Starter
|
Advanced
Joined: Apr 2017
Posts: 91
Likes: 15
From: Chicago
What amp to use
Ultra Limited
Running up front PRV 6.5 6MR500CF-NDY-4. (250 RMS/500 Prog)
In the rear PRV 6MB250-NDY-4. (125 RMS/250 Prog)
Super Tweeters
I have the JL Audio XD600/6v2. This gives me 75 W @ 4 Ohm per channel.
Sounds pretty good.... Stock head unit with DSP (will be going to the SD HDHU)
The question... am I under powered?
Would the Hertz SP4.900 be better? (160W @ 4 ohm)
Would the SD 1200.4 4 ohm be better? (198W @ 4 ohm). * this tends to be a "dirty/distorted" sound amp.
Running up front PRV 6.5 6MR500CF-NDY-4. (250 RMS/500 Prog)
In the rear PRV 6MB250-NDY-4. (125 RMS/250 Prog)
Super Tweeters
I have the JL Audio XD600/6v2. This gives me 75 W @ 4 Ohm per channel.
Sounds pretty good.... Stock head unit with DSP (will be going to the SD HDHU)
The question... am I under powered?
Would the Hertz SP4.900 be better? (160W @ 4 ohm)
Would the SD 1200.4 4 ohm be better? (198W @ 4 ohm). * this tends to be a "dirty/distorted" sound amp.
Stellar HDF Member
Joined: Aug 2014
Posts: 2,844
Likes: 574
From: Lockport Illinois
Ultra Limited
Running up front PRV 6.5 6MR500CF-NDY-4. (250 RMS/500 Prog)
In the rear PRV 6MB250-NDY-4. (125 RMS/250 Prog)
Super Tweeters
I have the JL Audio XD600/6v2. This gives me 75 W @ 4 Ohm per channel.
Sounds pretty good.... Stock head unit with DSP (will be going to the SD HDHU)
The question... am I under powered?
Would the Hertz SP4.900 be better? (160W @ 4 ohm)
Would the SD 1200.4 4 ohm be better? (198W @ 4 ohm). * this tends to be a "dirty/distorted" sound amp.
Running up front PRV 6.5 6MR500CF-NDY-4. (250 RMS/500 Prog)
In the rear PRV 6MB250-NDY-4. (125 RMS/250 Prog)
Super Tweeters
I have the JL Audio XD600/6v2. This gives me 75 W @ 4 Ohm per channel.
Sounds pretty good.... Stock head unit with DSP (will be going to the SD HDHU)
The question... am I under powered?
Would the Hertz SP4.900 be better? (160W @ 4 ohm)
Would the SD 1200.4 4 ohm be better? (198W @ 4 ohm). * this tends to be a "dirty/distorted" sound amp.
Road Warrior
Joined: Sep 2017
Posts: 1,401
Likes: 123
From: Sussex, WI
That amp will do close to 100 watts per channel clean. Those speakers can handle more but I don't think your ears will be able to with more power. Without having a lower frequency speaker, that combination will scream will more power. Not necessarily in a good way either
Road Master
Joined: Dec 2013
Posts: 1,072
Likes: 212
From: Boston,Ma
Ultra Limited
Running up front PRV 6.5 6MR500CF-NDY-4. (250 RMS/500 Prog)
In the rear PRV 6MB250-NDY-4. (125 RMS/250 Prog)
Super Tweeters
I have the JL Audio XD600/6v2. This gives me 75 W @ 4 Ohm per channel.
Sounds pretty good.... Stock head unit with DSP (will be going to the SD HDHU)
The question... am I under powered?
Would the Hertz SP4.900 be better? (160W @ 4 ohm)
Would the SD 1200.4 4 ohm be better? (198W @ 4 ohm). * this tends to be a "dirty/distorted" sound amp.
Running up front PRV 6.5 6MR500CF-NDY-4. (250 RMS/500 Prog)
In the rear PRV 6MB250-NDY-4. (125 RMS/250 Prog)
Super Tweeters
I have the JL Audio XD600/6v2. This gives me 75 W @ 4 Ohm per channel.
Sounds pretty good.... Stock head unit with DSP (will be going to the SD HDHU)
The question... am I under powered?
Would the Hertz SP4.900 be better? (160W @ 4 ohm)
Would the SD 1200.4 4 ohm be better? (198W @ 4 ohm). * this tends to be a "dirty/distorted" sound amp.
Thread
Thread Starter
Forum
Replies
Last Post
