How to do this ?
Thread Starter
|
Road Captain
Joined: Jan 2010
Posts: 658
Likes: 52
From: Lakeshore Wis.
How to do this ?
I watched every tutorial I could find on this. I have the new Cicada DSP150 amp. Initial setup video says to, power up the DSP without powering up the system in order to save the settings. How can you power up part of a piece of equipment, and not the whole thing ? I am not understanding this.
Stellar HDF Member
Joined: Aug 2014
Posts: 2,844
Likes: 574
From: Lockport Illinois
Those DSP/amps can be a little confusing on set up.
What they suggest is to leave all the amp gains turned counter clockwise and speakers unplugged from amp while doing the initial set up on the DSP portion.
Larry always suggested to put master and channel gains at -6 in the dsp before setting amp gains with his equipment.
What they suggest is to leave all the amp gains turned counter clockwise and speakers unplugged from amp while doing the initial set up on the DSP portion.
Larry always suggested to put master and channel gains at -6 in the dsp before setting amp gains with his equipment.
Thread
Thread Starter
Forum
Replies
Last Post
