Soundstream PN4.520D Instalation
Thread Starter
|
Advanced
Joined: Nov 2012
Posts: 97
Likes: 0
From: Michigan
Getting ready to start wiring this weekend. Was wondering if I could get the Supplemental 12v Power Point-91843-97, plug it into the 12v accessory plug under my seat, cut off the cigarette lighter portion and use the red wire as my remote on for the amplifier? I'm hoping this will work and I can shut the amp off via the accessory switch behind the nacelle when tunes are not required. ???
Outstanding HDF Member
Joined: Mar 2012
Posts: 2,843
Likes: 0
From: Michigan
Getting ready to start wiring this weekend. Was wondering if I could get the Supplemental 12v Power Point-91843-97, plug it into the 12v accessory plug under my seat, cut off the cigarette lighter portion and use the red wire as my remote on for the amplifier? I'm hoping this will work and I can shut the amp off via the accessory switch behind the nacelle when tunes are not required. ???
Thread Starter
|
Advanced
Joined: Nov 2012
Posts: 97
Likes: 0
From: Michigan
Fantastic!
I'm getting some Deutsch connectors for quick disconnects for speakers. Currently researching disconnects for power, and GND for amp. Any recommendations?
I'm getting some Deutsch connectors for quick disconnects for speakers. Currently researching disconnects for power, and GND for amp. Any recommendations?
Outstanding HDF Member
Joined: Mar 2012
Posts: 2,843
Likes: 0
From: Michigan
You could use something like this for your power, and a regular heat shrink spade connector for your remote on.
Thread Starter
|
Advanced
Joined: Nov 2012
Posts: 97
Likes: 0
From: Michigan
That's exactly what I was thinking. I could prob also get this:
and just build my own amp kit instead of forking out $80 at best buy.
Thread
Thread Starter
Forum
Replies
Last Post
