When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Been thinking about a new low rider and am concerned about the adjustable bars. Specifically wondering if/how they could be replaced with T-bars if I wanted to. Looks a fair bit different then a standard mount. Anyone know?
im doing the swap right now on my 14 low rider with la choppers club bars hi, and the risers bolt right up to the triple tree no prob just like any other risers would so the swap is no issue but you will need all new cables and lines if you go above 10 inches the club bars have a 13 in end rise and i needed all new stuff! hope this helps
Dont forget if you change bars you will also need a new headlight bucket bottom mount. also keep in mind if you have ABS you will need new line with anything over 8" tall.
Dont forget if you change bars you will also need a new headlight bucket bottom mount. also keep in mind if you have ABS you will need new line with anything over 8" tall.
Ditto. You can get a headlight mount from DK Customs. That is what I used. Also if over 10" on the bars; even without ABS the brake line will need to be replaced.
Ditto. You can get a headlight mount from DK Customs. That is what I used. Also if over 10" on the bars; even without ABS the brake line will need to be replaced.
Do you have the part number to that headlight mount from do customs I can't seem to find it? Thanks
does this do away with the brow over headlight? i've been wanting to do a 2" tank lift and the stock setup wont allow it .. then I started thinking about swapping the mounts on the triple tree . i am away from my bike for awhile so I can't run out and check
thanks
K
does this do away with the brow over headlight? i've been wanting to do a 2" tank lift and the stock setup wont allow it .. then I started thinking about swapping the mounts on the triple tree . i am away from my bike for awhile so I can't run out and check
thanks
K
Yes Kevin, the headlight brow is integrated into the clamps. If you add different clamps, it will eliminate the headlight brow and you will have relocate the headlight. I used the DK Customs kit and just mounted the stock headlight to the bottom tree.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.