Code P0134
Thread Starter
|
Novice
Joined: Aug 2011
Posts: 17
Likes: 0
From: France
Code P0134
Hello,
I have a doubt on my sensor 02 before.
I do smartune after laying cams Andrews TW21 on my Dyna 2005.
I adopted the 141NW002, probes are present from the beginning to the end of the session.
The 1st session no error code, the 2nd session: the code PO134 appears in the DTC window. I looked on the web and the possible cause may be a poor operating the motor.
My question:
What is your feedback about this error code.
This Code is he going to disappear once the final carto up.
Thank you for your answers
I have a doubt on my sensor 02 before.
I do smartune after laying cams Andrews TW21 on my Dyna 2005.
I adopted the 141NW002, probes are present from the beginning to the end of the session.
The 1st session no error code, the 2nd session: the code PO134 appears in the DTC window. I looked on the web and the possible cause may be a poor operating the motor.
My question:
What is your feedback about this error code.
This Code is he going to disappear once the final carto up.
Thank you for your answers
Last edited by harley66140; Mar 21, 2015 at 07:06 AM.
Thread Starter
|
Novice
Joined: Aug 2011
Posts: 17
Likes: 0
From: France
Hello,
I just made two records with a carto sided surprise and no error code.
I think the 141NW002 prepared for smartune:
AFR max 14.6
Acceleration enrichment: 0.00
Depletion deceleration: 0.0
had to create the default.
I just made two records with a carto sided surprise and no error code.
I think the 141NW002 prepared for smartune:
AFR max 14.6
Acceleration enrichment: 0.00
Depletion deceleration: 0.0
had to create the default.
Thread
Thread Starter
Forum
Replies
Last Post
