07 Street Bob, Python 2 into 1, mid controls
Thread Starter
|
Seasoned HDF Member
Joined: Nov 2006
Posts: 21,051
Likes: 19,181
From: The Wasteland
07 Street Bob, Python 2 into 1, mid controls
I have an 07 Street Bob with a Python 2 into 1 pipe. It has forward controls on it which I like but I would like to add the brackets and pegs for the stock mid controls just so I have a place to switch my feet to on longer rides. From looking at the bike I am wondering if it can be done, it looks like the mid control peg mounts would hit the pipe. My question would be is there anyone on the board running a Python 2 into 1 with mid controls? I did a search but came up with nothing of any use.
Edit- Please post pics if possible
Edit- Please post pics if possible
Last edited by Bubba Zanetti; Sep 20, 2015 at 11:06 AM.
Outstanding HDF Member
Joined: Sep 2014
Posts: 2,717
Likes: 273
From: Minnesota
Why not ask Python themselves?
http://www.pythonperformance.com/pro...oductId=220059
The link show's one model 1800-0274 listed for all Dyna FXD models 06-11.
With just that info I'd take it that they would fit the SuperGlide that has mid controls.
If you look around on their page you can find the "Support" link,, just email them and ask directly.
http://www.pythonperformance.com/pro...oductId=220059
The link show's one model 1800-0274 listed for all Dyna FXD models 06-11.
With just that info I'd take it that they would fit the SuperGlide that has mid controls.
If you look around on their page you can find the "Support" link,, just email them and ask directly.
Thread
Thread Starter
Forum
Replies
Last Post
