For anyone who has moved their T/S to the fork tubes I'm looking for any tips or help on getting the wires from the handlebars to the forks.....
Any tips or help would be appreciated.......
[/align]

[IMG]local://upfiles/23685/D14682DB9BD04D1BA943E48195B43589.jpg[/IMG]

 

I have run my fog lights and stereo down the brake line and then got a wrap to hold and cover the wires.... looks good! if you need pics let me know!

 

When I went to taller apes, I relocated signals to front forks with kuryakyn 49mm mounts. See my post here for moving wiring.

https://www.hdforums.com/m_1328001/tm.htm

 

its sort of hard to take pictures of that stuff, but this is what I did... I pulled the wires from each lamp slightly taught to the middle rear of the lower triple tree, and zip tied them. I then just did a zip tie every few inches, keeping the wires nice and flat to each other, up to the neck of the frame.
Its not a super duper custom "blind" piece of handywork, but you can oly really see that stuff when you turn the bike full right and stick your face in there.