Street Bob Forward Controls
Thread Starter
|
Cruiser
Joined: May 2007
Posts: 174
Likes: 0
Street Bob Forward Controls
So, I picked up the Dyna Forward Control Kit yesterday and anticipate installing it this afternoon. That said, I know that quite a few of the "Dyna" accessories are not made for the bob or don't seem to fit it correctly and am wondering if anyone out there has installed the 49080-06 Kit on their '07 SB and if they had any issues installing it? I am also a bit concerned about the clearance of the brake linkage and my Big Radius, but it looks good...just eyeballing it.
As usual, I'll provide my step-by-step photos of the process and before/afters :-)
**Update, found this info...good stuff! https://www.hdforums.com/m_1723863/tm.htm
I'll be doing that tonight, to h3ll with pulling the primary cover! Just hope the sweep in my pipes clears everything ;-)
As usual, I'll provide my step-by-step photos of the process and before/afters :-)
**Update, found this info...good stuff! https://www.hdforums.com/m_1723863/tm.htm
I'll be doing that tonight, to h3ll with pulling the primary cover! Just hope the sweep in my pipes clears everything ;-)
Tourer
Joined: May 2007
Posts: 435
Likes: 0
From:
RE: Street Bob Forward Controls
My install went pretty smooth and straight forward, just have the service manual handy along with the sprocket holding tool. I have a writeup link posted in a few other posts which are on the front page.
Thread
Thread Starter
Forum
Replies
Last Post
