Bar setup suggestions
Thread Starter
|
Stage I
Joined: Apr 2021
Posts: 1
Likes: 0
From: Illinois
Bar setup suggestions
I am in the market for a new bar setup on my 16’ SB I want to go with the hard case 9.5” 1 1/8” risers but I can’t seem to figure out what moto bar I want. I want to get away with the stock cable sizes so does anyone have any suggestion?
Outstanding HDF Member
Joined: Jan 2020
Posts: 2,333
Likes: 628
From: the South
Not to sure what you can get away with on that one. But i always recommend folks take a look at wild 1 chubbys when it comes to bars. Been around forever and make the best stuff I think. Good luck brother
Road Master
Joined: Jan 2017
Posts: 791
Likes: 386
From: New York
Welcome to the forum! Well the stock setup I believe are 12" bars with 2" risers, so its safe to assume that any riser/bar setup you have with a rise under that total you should be ok with. I swapped mine with 10" moto pull back T bars with zero issues. They are LA Choppers Kage Fighters.
Thread
Thread Starter
Forum
Replies
Last Post
