SERT map request
Thread Starter
|
Advanced
Joined: Aug 2007
Posts: 94
Likes: 0
From: Dayton, Ohio
SERT map request
Hi everyone! I'm new to the Dyna club and I could use some help. I just bought an 07 SB and I love it. Somehow while in a buying frenzy at the parts and accsy counter I was sold a SERT. All I want is louder pipes (Cycle Shack slip-ons ) and the SE AC kit. Can anyone kindly send me a map for this setup? I don't have the funds currently to have the 4 hour Dyno tune and I've got a ride coming up in a week. I've played with the SERT software and there are 2 calabrations that look right. What are the chances I can load a canned map and be good to go temporarily until I can have it tuned? I've contacted Jamie but haven't heard anything back from him.
I know somebody has a similar set up.
Thanks!
I know somebody has a similar set up.
Thanks!
Club Member
Joined: Jun 2007
Posts: 3,435
Likes: 28
From: Living in open carry state :D
RE: SERT map request
I am running the canned map #67 and it is running great.I did back down the decel enleanment by 10% to try to get rid of the slight popping on decel. This will work for me until I get it on a dyno.
Outstanding HDF Member
Joined: Dec 2006
Posts: 2,027
Likes: 4
From: Eastern NE
RE: SERT map request
I'm confused about your reference to "Jamie." Jamie is associated with Power Commander PC III, not the HD SERT.
If you bought a PC III, Jamie can definitely lead you in the right direction. Good luck!
If you bought a PC III, Jamie can definitely lead you in the right direction. Good luck!
Thread Starter
|
Advanced
Joined: Aug 2007
Posts: 94
Likes: 0
From: Dayton, Ohio
RE: SERT map request
07 street bob i'm refering to jamieWG......I've read several of his posts and he has had a lot of success with custom SERT maps.
I'm also wondering about HDmaps.com. Is it worth the $69 to get one of their maps?
I'm also wondering about HDmaps.com. Is it worth the $69 to get one of their maps?
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,225
From: the 50s & the 60s
RE: SERT map request
pierce, There is nothing better than the SERT for tuning
every single parameter imaginable.
There are cheaper tuners, but,
they do not do what the SERT does.
There are alsoeasier tuners, but,
they do not do what the SERT does.
Try a canned map or two that are closest to your setup.
It is only a few mouseclix to go back and forth
if you are not satisfied.
As to a custommap, send me a pm.
mud
every single parameter imaginable.
There are cheaper tuners, but,
they do not do what the SERT does.
There are alsoeasier tuners, but,
they do not do what the SERT does.
Try a canned map or two that are closest to your setup.
It is only a few mouseclix to go back and forth
if you are not satisfied.
As to a custommap, send me a pm.
mud
ORIGINAL: tpierce67
Hi everyone! I'm new to the Dyna club and I could use some help. I just bought an 07 SB and I love it. Somehow while in a buying frenzy at the parts and accsy counter I was sold a SERT. All I want is louder pipes (Cycle Shack slip-ons ) and the SE AC kit. Can anyone kindly send me a map for this setup? I don't have the funds currently to have the 4 hour Dyno tune and I've got a ride coming up in a week. I've played with the SERT software and there are 2 calabrations that look right. What are the chances I can load a canned map and be good to go temporarily until I can have it tuned? I've contacted Jamie but haven't heard anything back from him.
I know somebody has a similar set up.
Thanks!
Hi everyone! I'm new to the Dyna club and I could use some help. I just bought an 07 SB and I love it. Somehow while in a buying frenzy at the parts and accsy counter I was sold a SERT. All I want is louder pipes (Cycle Shack slip-ons ) and the SE AC kit. Can anyone kindly send me a map for this setup? I don't have the funds currently to have the 4 hour Dyno tune and I've got a ride coming up in a week. I've played with the SERT software and there are 2 calabrations that look right. What are the chances I can load a canned map and be good to go temporarily until I can have it tuned? I've contacted Jamie but haven't heard anything back from him.
I know somebody has a similar set up.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
Wide06
Ignition/Tuner/ECM/Fuel Injection
3
Oct 14, 2007 07:55 AM
WouldBeHD
General Harley Davidson Chat
4
May 15, 2007 11:36 PM
