Need a little help
Thread Starter
|
Stage II
Joined: Jun 2023
Posts: 2
Likes: 0
From: calif
Need a little help
Working on a 2003 FXDWG , its my brothers bike, apparently his rear wheel was stolen while he had it off and was working on it, he did some trading and ended up with a wheel that I believe is a earlier style, the mounting flange for pully takes nuts and bolts instead of bolts alone, in looking at pics of wheels I believe its a 1999 or earlier, the pully that came with this wheel is 70t
1 1/2, , I know the bike is suppose to have a 70t 1 1/8 , the belt is a 1 1/8, so in doing some research I believe a 40117 cast # pully with a 1/4 spacer should work, but that's for a wheel that's 2000 and later, so does and one know if this earlier 1999 and later will work if a buy a new pully 40117-00 and a 1/4 in spacer on this 2003 fxdwg
1 1/2, , I know the bike is suppose to have a 70t 1 1/8 , the belt is a 1 1/8, so in doing some research I believe a 40117 cast # pully with a 1/4 spacer should work, but that's for a wheel that's 2000 and later, so does and one know if this earlier 1999 and later will work if a buy a new pully 40117-00 and a 1/4 in spacer on this 2003 fxdwg
Thread
Thread Starter
Forum
Replies
Last Post
