wildone handlebars
Thread Starter
|
Cruiser
Joined: Jul 2005
Posts: 177
Likes: 0
From:
wildone handlebars
Ordered W0560 handlebars from chubby for dyna 04 lowrider. Like the feel but now feel that the tach and speedo look out of place. Anyone suggest remount brackets to handebar that would give cleaner look?
jeff
jeff
Intermediate
Joined: Jul 2005
Posts: 37
Likes: 0
From:
RE: wildone handlebars
Jeff - just an observation on my part, but I consider having the gauges on the tank with "naked" bars a cleaner look than putting them on the bars. It might just be perception since the W0560's are low rise and sit close to your dash. If you really wanted to move them, then the I think you would need some aftermarket gauge(s) with a t-bar mount - check drag specialties catalog - hoops of them available. Problem you would run into - as far as I know - would be a replacement dash panel for the tank, not sure if one's available that doesn't include the gauges. A bar with a higher rise might also change your "perception".
Just my .02
JW
Just my .02
JW
Road Captain
Joined: Sep 2005
Posts: 715
Likes: 0
From: Yaphank, Long Island
RE: wildone handlebars
Could you post some pics i'm trying to get some ideas for drag bars and I have the tach/speedo prob too. I was thinkin of getting a low ryder tank to replace mine jp carries them.
Steve
Steve
Thread Starter
|
Cruiser
Joined: Jul 2005
Posts: 177
Likes: 0
From:
RE: wildone handlebars
Thanks for the comments. Discovered it wiould be a lot of work to move the gauges, as I would need to find filler to take it's place. I think the bars would look great wtih a plain tank, however. I'm trying one other option first. Found 6.5 risers from Drag Specialities that may allow me to use the existing bars. They should be in soon.
jeff
jeff
Thread
Thread Starter
Forum
Replies
Last Post
