Have LED turn signals. They flash very fast. After search and reading about load equalizers bought one from the Harley shop, the $66.00 dollar one to work with alarm or no alarm. I don't have a alarm. Read directions seemed simple install. Took seat off and looked at wireing have two orange with white stripe, a green, black and a brown. Get out shop manual can find nothing about the green wire. the diagrams had me going in circles. The kit talks of purple, brown, black and orange with white stripe or blue wire. Well, just figured it is above my head. I am not an electronics person. My plan to save a little money did not work this time. Will be taking it to shop to have installed. Just disgusted, thanks for listening.

 

Kury has a kit that just plugs in real simple. that is what i have on mine.
Steve

 

brown is right turnsignal

violet is left turn signal

black is ground

Can't help ya on the striped wires

 

Take it back and get your money. They sell plug-in ones, guess your dealer ain't smart.
Kury has one, J&P Cycles has them.
http://www.jpcycles.com/productdetai...ad%20equilizer

 

Come to think of it I have one that I removed, I didn't like the little output the led's I installed putout.
I have to go find it might be the one I linked to.

 

Bikertronics (or something like that) sells plug in play too. My stealer actually carried that model.

 

Thanks guys, will see if they will take the equalizer back. Then order the Kury or Bikertronics.

 

I don't know about he biketronicks, but the kury still need the load equalize, IIRC.

 

I spoke with a guy at biketronics and he told me it's just a plug-n-play. I couldn't find much 'feedback' for them, so I went with the 'badlands 3' Heard great things, but it's a hard wire. Still pretty simple though. No problems yet...