Latest Shoptroll Project
Thread Starter
|
Banned
Joined: Jun 2007
Posts: 5,431
Likes: 0
From: Elizabethtown, Pa
Latest Shoptroll Project
Ok, so when I put the fork bag on my Streetbob I realized that it blocks some of the headlight. So in the first pic you can see the 1/2" spacer block that I added to the stockmounting block. That still wasn't good enough to properly aim the headlight so I made a new mounting block that moves the headlight up 1 1/2" and out 3/4" from the stock position. I used 1" aluminum round stock with a 15 degree mitre on the base. The top is milled down to 3/4" flats to fit between the light brackets. The second pic is the finished product.
[IMG]local://upfiles/35650/86D48C65F2714F2B9232ECF21861640C.jpg[/IMG]
[IMG]local://upfiles/35650/7527A3533DED47B5A7EDA99548477BCA.jpg[/IMG]
[IMG]local://upfiles/35650/86D48C65F2714F2B9232ECF21861640C.jpg[/IMG]
[IMG]local://upfiles/35650/7527A3533DED47B5A7EDA99548477BCA.jpg[/IMG]
Thread Starter
|
Banned
Joined: Jun 2007
Posts: 5,431
Likes: 0
From: Elizabethtown, Pa
RE: Latest Shoptroll Project
ORIGINAL: cpa55
I mounted my soft fork bag above the light on the handle bar.
I mounted my soft fork bag above the light on the handle bar.
KeithB
Date 10/4/2007 9:51:30 PM
Does that effect the headlight aim? I just re-aimed the headlight to where I wanted it.
Thread
Thread Starter
Forum
Replies
Last Post
