Shift Linkage
Thread Starter
|
Cruiser
Joined: Oct 2007
Posts: 100
Likes: 0
From:
Shift Linkage
Looking to change out the stock shift linkage on my 07 FXDWG. Being that I'm deployed I don't have access to a service manual to get the specs. Anybody know the size linkage required?
Banned
Joined: Oct 2007
Posts: 1,579
Likes: 1
From: Ft. Hood, Texas
RE: Shift Linkage
Should be aroung 13"-15", I have a superglyde, switch to fowards, you can play with size, repositioning the shifter up or down. check ebay, I got a three skull linkage to match my mirror stems for around $50 with all hardware. 
Grand HDF Member
Joined: Apr 2005
Posts: 4,022
Likes: 3
From: Hudson Valley- NY
RE: Shift Linkage
For a cheap fix until you get a little more sure on what you want, get a short piece of 5/16" threaded rod and use that along with the ends on the stock linkage. You can play with different lengths and looks if you have mid or forward controls. Threaded rod is cheap, about $6.00 for a 3' length at any hardware store. Once you get the look/length you want, you can go shopping for a more custom unit. Take a look at roadnames.us who did my custom shifter linkage. Vance is a great guy to work with. They're a sponsor here on the Forums to boot.
Thread
Thread Starter
Forum
Replies
Last Post
