Doin' some Bob Mods w/pics
Thread Starter
|
Tourer
Joined: Oct 2007
Posts: 439
Likes: 22
From: League City, Texas
Doin' some Bob Mods w/pics
I like the feel of the stock bars, so I decided to run the wires inside. Were the bars are grooved on the bottom side, under the controls and grips, I cut a notch there and then cut another notch under the center of the bar, between the risers. Opinions are welcome.
Road Master
Joined: Feb 2007
Posts: 773
Likes: 1
From: NZ but live in Dorset, England
RE: Doin' some Bob Mods w/pics
nice job ! with the holes between the clamps it shouldn't crack
Trending Topics
RE: Doin' some Bob Mods w/pics
That really cleaned up your bars. Looks good. I would make looking for cracks part of your pre ride routine just to be safe, but it looks like your slot is small enough that you should be fine.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Tourer
Joined: Oct 2007
Posts: 439
Likes: 22
From: League City, Texas
RE: Doin' some Bob Mods w/pics
Yeah, I made the slot small as i could get away with. The 2 sets of wires barely fit through the hole and its right in the middle of the clamp. My next project is front brake upgrade.
