Superglide - bob
Thread Starter
|
Road Master
Joined: Sep 2007
Posts: 929
Likes: 0
From:
RE: Superglide - bob
Thanks for the complements guys. FYI if interested:
Original seat bottom:
Cut to fit, note on the bottom of the left cut there is extra space made for one of the bolts on the frame. Also what you can't see is where on the left and right rear of the set I removed about 4" x .5" of plastic that would hit the fender rail.
Original seat bottom:
Cut to fit, note on the bottom of the left cut there is extra space made for one of the bolts on the frame. Also what you can't see is where on the left and right rear of the set I removed about 4" x .5" of plastic that would hit the fender rail.
Road Captain
Joined: Sep 2007
Posts: 596
Likes: 0
From:
RE: Superglide - bob
I like that alot. "Super Bob" does have a nice ring to it, better get a copyright on it before the MoCo does! Only thing I'd change on your bike, the way it sits, is to angle the bars back in line with the fork angle, for an example look at Jackyl's bike, the post just above this one. But yeah that's a slick nickel alright!
Gilly
Gilly
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Ultimate HDF Member
Joined: Oct 2007
Posts: 7,562
Likes: 11
From: Palm Harbor fl.
RE: Superglide - bob
ORIGINAL: WildBillAce2
Thanks for the complements guys. FYI if interested:
Original seat bottom:
Cut to fit, note on the bottom of the left cut there is extra space made for one of the bolts on the frame. Also what you can't see is where on the left and right rear of the set I removed about 4" x .5" of plastic that would hit the fender rail.
Thanks for the complements guys. FYI if interested:
Original seat bottom:
Cut to fit, note on the bottom of the left cut there is extra space made for one of the bolts on the frame. Also what you can't see is where on the left and right rear of the set I removed about 4" x .5" of plastic that would hit the fender rail.
Did you cover up the cuts with something to maybe help against water saturation if in the rain or washing the bike?
Thread Starter
|
Road Master
Joined: Sep 2007
Posts: 929
Likes: 0
From:
RE: Superglide - bob
I just stuck it on there for now - it doesn't rain much here anyway and I never use a powerwasher on the bike.
When I re-cover the seat I'll probably put some plastic under there.
BTW, you may not need to cut as much as I did, good luck!
When I re-cover the seat I'll probably put some plastic under there.
BTW, you may not need to cut as much as I did, good luck!
Thread
Thread Starter
Forum
Replies
Last Post
