no school taillight
Thread Starter
|
Tourer
Joined: Feb 2007
Posts: 321
Likes: 0
From:
no school taillight
has anyone seen these guys on ebay? the product looks good, any comments on them? They offer a weld on product as well as an axle mounted product for 3/4 in axle hole. do 07's have a 1 in axle? or 3/4"?
I am thinking about chopping my rear fender and dropping the tailight and plate to the axle.
thanks in advance
I am thinking about chopping my rear fender and dropping the tailight and plate to the axle.
thanks in advance
Thread Starter
|
Tourer
Joined: Feb 2007
Posts: 321
Likes: 0
From:
RE: no school taillight
Road Warrior
Joined: Oct 2006
Posts: 1,506
Likes: 1
From: eastern shore, md.
RE: no school taillight
theeboy... just make sure those have gussets on the back side... otherwise you'll be dragging it behind you down the road at some point....ask me how i know!
Trending Topics
Thread Starter
|
Tourer
Joined: Feb 2007
Posts: 321
Likes: 0
From:
RE: no school taillight
I read through some of your older posts mike and that's why I have steared away from dreamweavers product. I was just looking at these again and it seems they are not gusseted either. I am reconsidering
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Banned
Joined: Jan 2007
Posts: 4,144
Likes: 1
From:
Road Warrior
Joined: Oct 2006
Posts: 1,506
Likes: 1
From: eastern shore, md.
RE: no school taillight
ORIGINAL: TheeBoy
I read through some of your older posts mike and that's why I have steared away from dreamweavers product. I was just looking at these again and it seems they are not gusseted either. I am reconsidering
I read through some of your older posts mike and that's why I have steared away from dreamweavers product. I was just looking at these again and it seems they are not gusseted either. I am reconsidering
you can get a raw one for about $100 and have it powdercoated..[pssst...i do powdercoating
]also check out fabricator kevin's stuff... very well made!
http://www.fabkevin.com/custom_taillights.htm
happy hunting!