Rear turn signal deletion
Thread Starter
|
Advanced
Joined: Feb 2008
Posts: 55
Likes: 0
From:
Rear turn signal deletion
i wanna delete my friggen turn signals but the problem I run into is teh cosmetic oval indent that will be left behind. Any ideas on what to do with that? Ive thought of getn them filled then powder coated, or making some filler pieces to bolt in.... What have yall done?
Road Captain
Joined: Jul 2007
Posts: 718
Likes: 0
From:
RE: Rear turn signal deletion
I went to the dealer and they tried to sell me chrome buttons. I asked, I thought they sold inserts for turn signal relocates. Azzholes they would have had to order them anyway.
Tourer
Joined: Oct 2007
Posts: 344
Likes: 0
From: Scotland
RE: Rear turn signal deletion
ORIGINAL: jmpancoast
Just an easy way out.....
how about the chrome ovals from the relocation kit and a short bolt with an chrome or black acorn nut..
Just an easy way out.....
how about the chrome ovals from the relocation kit and a short bolt with an chrome or black acorn nut..
Tourer
Joined: Sep 2007
Posts: 403
Likes: 0
From: Grand Island NE
RE: Rear turn signal deletion
Just fixed this I took a little field trip to the local Menards and bought a package of T nuts (they are used in wookworking hammered into a whole and have little teeth that embed into the wood to hold tight and a couple stove bolts with tapered flat head. First I took the little teeth on the T nuts and flattened them out the ones I bought fit into the old hole on the fender like a glove. This brings the threads into the struts and once I cut the stove bolts down I had a perfect flush fit on the inside of the fender so no chance of hitting the tire. Then covered the oval indentation with a stick on medallion from HD. I think it looks great if you want pm me and I will send you a pic. Here is a link to the medallions I used. http://www.harley-davidson.com/gma/g...bmLocale=en_US
Thread
Thread Starter
Forum
Replies
Last Post
