So I just got a small scratch on my new street bob, does anyone have any tips or step by step instructions on what to use and how to take it off, any help would be great, thanks.

 

which paint

 

vivid black

 

How deep can you see primer or just surface if it is surface sand LIGHTLY with 1500 grit wet paper then use a buffer This can be a small one on end of drill or can be done by hand with polishing compound and cloth. Be carefull sand to much and you will go through the clear be very carefull of any edges it will be best to put tape on them before sanding. This is really and experience related repair if you are not comfortable dont do it and seek the help of professional. You can do more harm than good

 

I've used Maguiar's scratch X and it really does a pretty good job. I just did it by hand with a microfiber pad. It really depends how deep the scratch is.
Smiley

 

Head on over the the Detailing section, this has been posted there like an oil thread

 

this might help... http://www.langka.com/paint_chip_repair.php