Easy Bracket Help
#1
Easy Bracket Help
I am trying to install a set of easy brackets on my 2006 Street Bob. I attached the docking hardware and when I try to set the bracket inplace it will not attach properly. I tryed loosening the bolts and the bracket falls into place. I then tighten the bolts and the brackets will not come off. I have been working about 2 hours on this. It has to binding somewhere but I cannot find it. I was hoping somebody else might have had a similar experience. Any ideas will be attempted.
#2
Not so easy brackets
I had the same problem installing mine. It took some tweaking but i was able to make it work. If i remember correctly, you have to loosen the mounting bolt that goes through the saddlebags to get them on the bike, then adjust and tighten while they are on the bike until you can get them on and off easily. They still need some wiggling around occassionally to get them on and off but i just love them.
#3
I had the same problem installing mine. It took some tweaking but i was able to make it work. If i remember correctly, you have to loosen the mounting bolt that goes through the saddlebags to get them on the bike, then adjust and tighten while they are on the bike until you can get them on and off easily. They still need some wiggling around occassionally to get them on and off but i just love them.
#4
#5
#6
Still having Issues
I finally got the right side to attach but it looks like crap. I had to add a spacer to unbind the bracket. I repeated the same idea on the left side and it binds up also. I am out tinkering with the bracket now and hope to have a solution soon.
Last edited by Skyking75; 03-03-2011 at 06:25 PM.
#7
Trending Topics
#8
#9