Identify Dyna Pipes
Thread Starter
|
Stage III
Joined: Nov 2007
Posts: 3
Likes: 0
Identify Dyna Pipes
I have a 1996 Dyna Wide Glide I bought used. The pipes that were on it are not H-D. I was told they were V&H, but after talking with them, they told me definitely not. One of the heat shield mounts has broken off and if welded, it would of course ruin the chrome. I have been unable to identify the maker of the pipes so that I can chase down a replacement shield. Any help would be greatly appreciated. Please check the picture if you could help...Bob
Club Member
Joined: Feb 2008
Posts: 11,483
Likes: 39
From: Passaic County, NJ
With that being a carbed evo, that could just be a simple set of drag pipes. I remember drags being a dime a dozen. Are there any markings on the backside of the pipes?
Also, get the mount welded and then get the heat shield rechromed. No big deal.
Also, get the mount welded and then get the heat shield rechromed. No big deal.
Last edited by SC-Longhair; Mar 16, 2009 at 03:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
