Oil drain bolt
Thread Starter
|
Tourer
Joined: Aug 2007
Posts: 287
Likes: 0
From: Dorset, UK
Oil drain bolt
Feel like a dummy asking this but the diagram in the service manual is not very clear.
Is the engine oil drain bolt on my 07 the one that is facing you on the left side of the engine by the rubber bung on the frame? if so do you hav to remove the bung to get a socket & ratchet on it?
Is the engine oil drain bolt on my 07 the one that is facing you on the left side of the engine by the rubber bung on the frame? if so do you hav to remove the bung to get a socket & ratchet on it?
Road Warrior
Joined: Jul 2007
Posts: 1,707
Likes: 4
From: Newtown, PA
I am looking on Pages 80 and 85 of my Dyna 2007 Owner's Manual. Under the transmission on the left side, you will see two drain plugs. The drain plug for the engine oil is the one that is towards the rear of the bike (in the oil pan under the transmission - Pg. 80). The plug in front of that plug and a little inboard, is the transmission drain plug (Pg. 85). You shouldn't have to remove anything to get the drain plug out. Make sure the bike is standing upright when you change the oil. Either on a jack, or with a 2x4 under the sidestand.
Thread
Thread Starter
Forum
Replies
Last Post
