back from the dyno
Thread Starter
|
Outstanding HDF Member
Joined: Dec 2008
Posts: 2,419
Likes: 1
From: Ashland Ore.
back from the dyno
I'm waiting for my indy to e-mail me the read out and I will post it as soon as I get it. He was out of paper and couldn't print me one. Here it is:
88ci 92hp 95ftlbs I'm pleased. The map that Jamie sent with the PC was giving me too much fuel all through the map. No decel pop and the flat spot I originally had is gone. Runs great. Pulls like a train.
88ci 92hp 95ftlbs I'm pleased. The map that Jamie sent with the PC was giving me too much fuel all through the map. No decel pop and the flat spot I originally had is gone. Runs great. Pulls like a train.
Ultimate HDF Member
Joined: Apr 2008
Posts: 5,384
Likes: 12
From: Out on Deranged
Not too shabby Don! I'm happy for ya.....wanna race? LOL you'd clean me up pretty goood with my 96 ci stage 1!
I'm having trouble with my map from FM too,it backfires at points and some decel popping + it idles too damn fast! I'm tempted to get an autotune and just stop playing with it. Even if that doesn't replace an actual dyno.
I'm having trouble with my map from FM too,it backfires at points and some decel popping + it idles too damn fast! I'm tempted to get an autotune and just stop playing with it. Even if that doesn't replace an actual dyno.
Last edited by maddghost; Jul 6, 2009 at 05:23 PM.
Road Master
Joined: Feb 2008
Posts: 1,214
Likes: 0
From: Tacoma, WA
Thats what I wanted to F'n hear Don. Wish I could have rode up there with you for the tune.
What a big difference heads and cams can make... Just remember who gave you the deal on the cams, lol.
What a big difference heads and cams can make... Just remember who gave you the deal on the cams, lol.
Thread Starter
|
Outstanding HDF Member
Joined: Dec 2008
Posts: 2,419
Likes: 1
From: Ashland Ore.
Big thanks to tweakin for the cams and to mud for the pipe. The ride up wasn't bad, the return got a little soggy, dried out by Kirkland.
Elite HDF Member
Joined: Feb 2008
Posts: 4,606
Likes: 2
From: Denver, Colorado
Trending Topics
Thread Starter
|
Outstanding HDF Member
Joined: Dec 2008
Posts: 2,419
Likes: 1
From: Ashland Ore.
9.4:1 CR Jamie told me he didn't have a map for my specific build and told me that I would need to dyno it to get it correct. It was quite a bit off. Way to much fuel.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
Thread Starter
|
Outstanding HDF Member
Joined: Dec 2008
Posts: 2,419
Likes: 1
From: Ashland Ore.
Jason, your map will most likely be close. My build is kind of an odd ball in that I chose to do my heads instead of the 95" big bore. Being that it's 88ci I think that throws them a curve ball. Also, Ill get your stuff shipped out to you tomorrow.
Last edited by thedonthere; Jul 6, 2009 at 05:53 PM.