anybody ever mod the stock breather backing plate by putting holes to allow the carb to pull more air through,, think i am going to have to buy a big suker,, yet might try to mod the stocker before hand.... thanks.........

 

Wouldn't it be unfiltered air?

I have a round AC and any holes I drill would be on the inside of the filter...meaning the air being pulled is not going through the filter.

 

I was thinking the same thing. Plus the air would be comming right off the engine=hot air

If you want more air, try this
http://www.dragspecialties.com/fatbo...44?q=1011-0782