When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
I have a 2003 lowrider and the stovk seat hurts my lower back after about 30 miles I am thinking about having it modified by mean city cycles but I really like the looks of the Mustang solo tripper does anyone have one of these and how are they comfort wise
Also, a lot of back pain can be attributed to the posture and reach while riding. You may want to play with your bars a bit and see if you can find a more comfortable spot.
I had my Street Glide seat modified by MCC before I sold the bike. The bike sat too high and was too wide where the backbone meets the section of the seat - right at the end of the tank. MCC was able to lower me some and replaced the stock foam with a much more comfortable foam. You have to call and schedule a timeslot for your seat - they are that busy. My wait was about a month and a half, but when my timeslot was finally up they had my seat done and shipped the very same day.
I sold my Street Glide and current have an '09 Lowrider. The stock seat and seating position has me too cramped to use the mids for long periods of time - I constantly feel like I need to stretch my legs. I just purchased a Fastback seat from C&C seats, which should be arriving this Friday. It should lower me about 1" and move me back about 1" compared to stock. This seat design may not be for everyone, but I will post a review when I receive it and put some miles in the new saddle.
BtW, I am 5' 6" and weigh 150lbs - not sure if that helps at all.
good luck with your search!
Matt
I can't recall ever having seen a post from anyone dissatisfied with their Mustang seat. I had one on a Honda Aero and I could ride all day with nary a whimper from my backside. The stock Honda seat on the other hand would have me in agony after 50 miles or so.
So far the stock seat on my Low Rider is reasonably comfy but I'll probably put on a Mustang next spring (or sooner).
I've had back surgery with fusions at L4& L5. After 50 miles, I was in so much agony I literaly had to either stand up or stop and get off the bike......The top of my thighs would literally go numb and the pain down the left buttock was like a red hot poker stabbing ya. I'm short, so I cant switch over to a "well padded" seat that would raise me up any higher than 1/2"....or I wouldn't be able to put my feet flat on the ground. Mind you, I have 11" shocks on mine too.
Anyway, I read about the Air Hawk inflatable Seat Cushion for motorcycles. It was developed for people in wheel chairs use to relieve pressure points. Truck drivers also use them. I bought one and so far am very happy with it. I can ride 170+ miles pain free for the first time. I would love to have a Sundowner or Mustang, but dont want to spend $$$$$ only to find I cant put my feet flat, and they wont take it back without a hefty "restocking fee".
Also, a lot of back pain can be attributed to the posture and reach while riding. You may want to play with your bars a bit and see if you can find a more comfortable spot.
I AGREE. If you are leaning even an inch forward or back it can strain your back.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.