1000 mile service?
Advanced
Joined: Sep 2008
Posts: 81
Likes: 0
From: Tampa Bay
"...Syn3 is made by Citgo, as are all Harley lubricants."
Crap. I need to switch synthetic oil now. I'm not using any of Chavez products in my bike.
Notice the wheel spokes. I was getting some rear tire wobble and some of the spoes needed tighterining.
Heres the list
IRST SERVICE INTERVAL - 1,000 Mile Checkup
Inspect air cleaner and service as required.
Inspect brake fluid level and condition.
Inspect brake pads and discs for wear.
Adjust the clutch.
Inspect and lubricate control cables.
Inspect drive belt and sprockets. Adjust drive belt deflection if necessary.
Inspect electrical equipment and switch operation.
Replace oil filter and oil.
Inspect engine idle speed.
Inspect enrichener operation.
Inspect fuel lines, fuel fittings, fuel supply valves for leaks.
Lubricate jiffy stand.
Adjust primary chain.
Replace primary fluid and inspect fluid and drain plug.
Inspect spark plugs.
Inspect and service Springer fork rocker bearings.
Adjust and lube steering head bearings.
Inspect throttle operation.
Set tire pressure and inspect tire for damage.
Replace and inspect transmission fluid.
Inspect wheel spoke tightness.
Inspect oil and brake lines for leaks.
Torque all critical fasteners.
Road test.
Crap. I need to switch synthetic oil now. I'm not using any of Chavez products in my bike.
Notice the wheel spokes. I was getting some rear tire wobble and some of the spoes needed tighterining.
Heres the list
IRST SERVICE INTERVAL - 1,000 Mile Checkup
Inspect air cleaner and service as required.
Inspect brake fluid level and condition.
Inspect brake pads and discs for wear.
Adjust the clutch.
Inspect and lubricate control cables.
Inspect drive belt and sprockets. Adjust drive belt deflection if necessary.
Inspect electrical equipment and switch operation.
Replace oil filter and oil.
Inspect engine idle speed.
Inspect enrichener operation.
Inspect fuel lines, fuel fittings, fuel supply valves for leaks.
Lubricate jiffy stand.
Adjust primary chain.
Replace primary fluid and inspect fluid and drain plug.
Inspect spark plugs.
Inspect and service Springer fork rocker bearings.
Adjust and lube steering head bearings.
Inspect throttle operation.
Set tire pressure and inspect tire for damage.
Replace and inspect transmission fluid.
Inspect wheel spoke tightness.
Inspect oil and brake lines for leaks.
Torque all critical fasteners.
Road test.
Thread
Thread Starter
Forum
Replies
Last Post
