Took the tank emblems off today. I did heat them up with a hair dryer emblems came right off, the backing will not come off the tank it is stuck on there real good. I tried wd-40 no luck where can I get this goo be gone I have been reading about. Any other suggestions.

Thanks
Tom

 

3M adhesive remover works well.

 

I've used both mineral spirit and just plain old water in the past and both worked fine. You can order goo gone online if you cant find it locally.

http://www.magicamerican.com/

 

I took the bulk of mine off with a razor blade then used wd 40 for the last bit.. It was like you said wd 40 wasnt hitting **** till I got most of it off with the blade..

 

Goo Gone can be bought at WalMart.

 

you should be able to find goo gone at an local independent hardware store, but if you have to support corporate America, it should be readily available at any Loew's or Home Depot...

 

Or Home Depot or Lowes. It will work guaranteed.

 

I bought some of this stuff about 10 years ago when it was in a spray can at Pep Boys and it works amazingly well.

 

rubbing alcohol i hear works too...

 

Rolled mine off with my thumb, used goo gone for the residue.