Dyno or Power Commander or Both
Thread Starter
|
Novice
Joined: Oct 2009
Posts: 20
Likes: 0
From: Visalia, California
I have an 07 SB with Vance and Hines Big Shot Staggereds and I contacted Jamie at Fuel Moto for the PC. We went with the PC V and their version of the performance air kit. Nice thing is Jamie dials in the PC maps for your bike and accesories before sending it to you.
Nice people to deal with and prices are right.
Good Luck and good riding,
Nice people to deal with and prices are right.
Good Luck and good riding,
Road Warrior
Joined: May 2007
Posts: 1,641
Likes: 5
From: West Branch, Michigan
Have a 2007 LR that I put V&H Q Series Double Barrels on, with the SE Stage 1 A/C and a PCIII. Had them richen up the mixture so it doesn't run as lean and had it dyno tuned.
I find that the engine runs cooler now. Dealer did all the work. No popping or pinging, but it has the nice, deep throaty....blub,blub,blub sound when slowing or downshifting to a stop. My Dyno numbers are Torque 86.1 and max power 74.2
I did notice a slight drop in gas mileage of about 3mpg.... but again, we increased the fuel to air mixture. My Right leg isn't roasting anymore either.
I find that the engine runs cooler now. Dealer did all the work. No popping or pinging, but it has the nice, deep throaty....blub,blub,blub sound when slowing or downshifting to a stop. My Dyno numbers are Torque 86.1 and max power 74.2
I did notice a slight drop in gas mileage of about 3mpg.... but again, we increased the fuel to air mixture. My Right leg isn't roasting anymore either.
Thread
Thread Starter
Forum
Replies
Last Post
gfroy91
Ignition/Tuner/ECM/Fuel Injection
3
Jul 2, 2014 11:09 AM
california, commander, davidson, decel, dyno, harley, install, installing, motorcycle, pop, power, tune, visalia
