Sissy Bars?
Tourer
Joined: Nov 2008
Posts: 389
Likes: 0
From: Tempe, Arizona
I've gotten a bunch of pm's about this so here is a link to the one i have. 1504-0003 might be the part number I think. Scroll down in the pics it is the "tall bar". It comes chrome, cost me $15 to powdercoat it along with the sideplates.
http://www.dragspecialties.com/fatbook/16/365/7714182
Here is my setup right now:
12" Fatty Ape'd Z Bars from Licks Cycles
2" Riser Extensions from Loner Industries
LePera Bare Bones Seat
12" Round Sissy Bar with rigid sideplates (sets about 14" when installed)
http://www.dragspecialties.com/fatbook/16/365/7714182
Here is my setup right now:
12" Fatty Ape'd Z Bars from Licks Cycles
2" Riser Extensions from Loner Industries
LePera Bare Bones Seat
12" Round Sissy Bar with rigid sideplates (sets about 14" when installed)
Tourer
Joined: Jul 2009
Posts: 260
Likes: 1
From: Sunny SoCal
I've gotten a bunch of pm's about this so here is a link to the one i have. 1504-0003 might be the part number I think. Scroll down in the pics it is the "tall bar". It comes chrome, cost me $15 to powdercoat it along with the sideplates.
http://www.dragspecialties.com/fatbook/16/365/7714182
Here is my setup right now:
12" Round Sissy Bar with rigid sideplates (sets about 14" when installed)
http://www.dragspecialties.com/fatbook/16/365/7714182
Here is my setup right now:
12" Round Sissy Bar with rigid sideplates (sets about 14" when installed)
Hey coach, can you confirm that the sissybar you have is NOT the "tapered" one listed on dragspecialties site
Tourer
Joined: May 2008
Posts: 283
Likes: 2
From: San Antonio, TX
RudeDog built one for me also. Feel free to pm me. Check out his album.
https://www.hdforums.com/forum/membe...sissybars.html
https://www.hdforums.com/forum/membe...sissybars.html
Cruiser
Joined: May 2007
Posts: 169
Likes: 0
From: Charleston S.C.
dont mind the custom work to the front end, changed my mind about that went back to original specs, only good one of sissy bar. I made this sissy bar from solid stock of 9/16" square rod. I used 6 feet, thats right, top is 30"s and ole lady says it rides good.
Tourer
Joined: Apr 2006
Posts: 463
Likes: 0
From: Arizona
I questioned Cycle Vision about their Attitude stick.
Here's my email to them:
You state that your "Old School" sissy bars won't hold a passenger, but that you 5/16" square stock sissy bars will. Why won't the round stk. sissy bars hold a passenger whereas a square stk. sissy bar will?
Do you make any square stock sissy bars that have the same bends as the round "old school" sissy bars? I'm looking for an 18" tall sissy bar that I can use with a passenger. I don't care for the doo-dads sticking on the top of the sissy bar which is why the "old school" appealed to me. Any suggestion?
Thanks.
------------------------------------------------------------------------------------
Their response:
Thank you for your e-mail and your interest in our product.
Yes, the 18 attitude stick will hold an average passenger not a large passenger.
Thank you again for your interest.
Bottom line I guess is No Fat Chicks.
Here's my email to them:
You state that your "Old School" sissy bars won't hold a passenger, but that you 5/16" square stock sissy bars will. Why won't the round stk. sissy bars hold a passenger whereas a square stk. sissy bar will?
Do you make any square stock sissy bars that have the same bends as the round "old school" sissy bars? I'm looking for an 18" tall sissy bar that I can use with a passenger. I don't care for the doo-dads sticking on the top of the sissy bar which is why the "old school" appealed to me. Any suggestion?
Thanks.
------------------------------------------------------------------------------------
Their response:
Thank you for your e-mail and your interest in our product.
Yes, the 18 attitude stick will hold an average passenger not a large passenger.
Thank you again for your interest.
Bottom line I guess is No Fat Chicks.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Stellar HDF Member
Joined: Mar 2009
Posts: 2,454
Likes: 58
From: Graysville, AL
I really like the attitude stick, but not sure if they make one for my 2010 Wide Glide. I sent them an email so hopefully they will get back to me. The 30" seems pretty tall so I think the 18" will be just right.