Info about Carlini apes
Thread Starter
|
Cruiser
Joined: Oct 2009
Posts: 186
Likes: 0
From: Greece
Info about Carlini apes
I checked some photos and some previews about the Carlini Original Apes.
I think i'm going for the 13'' tall-1,25'' thick.
But the base of the apes are thinner than 1.25''...aren't they
If they are, do the fit with genuine HD risers for 1'' bars?
Carlini has risers for 1,25'' bars,but there's a note: for 1,25'' non step bars...
What's a bloody non step bar?
Thanks guys
I think i'm going for the 13'' tall-1,25'' thick.
But the base of the apes are thinner than 1.25''...aren't they
If they are, do the fit with genuine HD risers for 1'' bars?
Carlini has risers for 1,25'' bars,but there's a note: for 1,25'' non step bars...
What's a bloody non step bar?
Thanks guys
Road Captain
Joined: Dec 2007
Posts: 547
Likes: 2
I was looking at there web site and it looks like the 1.25 inch ape original bars are step down to 1 inch in the picture and non step on there 1.5 inch bars. At best, I would just call them or email them to get the specifics on the 1.25 inch ones that you want so that you have the right set of risers.
Ultimate HDF Member
Joined: Nov 2009
Posts: 7,079
Likes: 21
From: Queens, NY
stepped means that the thickness of the bar drops down to 1" at the riser area so that you can get your stock 1" risers on
non stepped means that it's 1.25" thick at the risers so you'll have to shell out for carlini's risers for 1.25" bars.
non stepped means that it's 1.25" thick at the risers so you'll have to shell out for carlini's risers for 1.25" bars.
Thread
Thread Starter
Forum
Replies
Last Post
Mouth
General Harley Davidson Chat
7
Feb 21, 2011 07:40 PM
