GAS CAP (help)
Thread Starter
|
Road Warrior
Joined: Feb 2009
Posts: 1,608
Likes: 1
From: MICHIGAN
GAS CAP (help)
can anybody tell me how to take apart the gas cap and gas guage cap on a 2008 street bob
?
i`m lookin to have them powder coated and need them dismantled
thanks,
jeff
?i`m lookin to have them powder coated and need them dismantled
thanks,
jeff
Road Warrior
Joined: May 2006
Posts: 1,535
Likes: 42
From: Bossier City, LA
1. Disconnect negative battery Terminal
2. Lossen fuel tank to gain access to fuel gauge connector
3. Disconnect fuel gauge connector located under left side of fuel tank
4. detach terminals from connector
DO NOT TWIST FUEL GAUGE OR WIRING DURING REMOVAL
5. Pull up on gauge. Remove Gaugue gasket and wiring from fuel tank. Dicard gasket
2. Lossen fuel tank to gain access to fuel gauge connector
3. Disconnect fuel gauge connector located under left side of fuel tank
4. detach terminals from connector
DO NOT TWIST FUEL GAUGE OR WIRING DURING REMOVAL
5. Pull up on gauge. Remove Gaugue gasket and wiring from fuel tank. Dicard gasket
Thread
Thread Starter
Forum
Replies
Last Post
