Baker IPB
Elite HDF Member
Joined: Apr 2007
Posts: 4,919
Likes: 23
From: Seattle, WA
Who else besides Baker has anyone used for IPB replacement ...? I got a Belt Drive Limited (BDL) one included in my belt drive ....
The instructions say replacing the IPB is optional ... there is a seal included it says to use if you don't replace the bearing ....
As far as I can tell, my original IPB is still sound, but if I have the primary apart to install the belt drive, thinking it wouldn't be that much more just to replace it ....
R/
'Chop
The instructions say replacing the IPB is optional ... there is a seal included it says to use if you don't replace the bearing ....
As far as I can tell, my original IPB is still sound, but if I have the primary apart to install the belt drive, thinking it wouldn't be that much more just to replace it ....
R/
'Chop
Thread Starter
|
Road Master
Joined: Feb 2008
Posts: 918
Likes: 0
From: Calgary, Canada
For those interested the baker will not fit an 08.
The shaft size is different .
Baker does not as of yet have a replacement for my model but may in the future..
I did mention to them it does not say that on their website.
There was nothing wrong with mine. I just had it open anyway.
The crappy part is i couldnt check until i cut the inner race off.
So i had to buy a new inner .
Lesson learned for all .....
The shaft size is different .
Baker does not as of yet have a replacement for my model but may in the future..
I did mention to them it does not say that on their website.
There was nothing wrong with mine. I just had it open anyway.
The crappy part is i couldnt check until i cut the inner race off.
So i had to buy a new inner .
Lesson learned for all .....
Thread
Thread Starter
Forum
Replies
Last Post
Todd v.
Primary/Transmission/Driveline/Clutch
2
Jun 25, 2018 06:45 AM
