New Exhaust
Thread Starter
|
Intermediate
Joined: Aug 2009
Posts: 40
Likes: 0
From: Wichita
New Exhaust
Ok picked the bike up Sat. Putting new exhaust on tomorrow, but the shop book won't be in for another week. Could use some help on the torque specs on a 2010 fat bob.
will put pics up as soon as I am done.
Thanks
will put pics up as soon as I am done.
Thanks
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
.
Jeep, tighten evenly, couple turns on one, then the other. back and forth.
tighten good and snug. don't over do it. doesn't have to be extra tight.
on my machine, I have a couple threads showing outside the nut.
Use the stock HD gaskets. not the Screaming Eagle.
go back and check them after a couple good rides.
.
.
.
Ultimate HDF Member
Joined: Nov 2009
Posts: 7,079
Likes: 21
From: Queens, NY
dono why i'm replying, mud nailed it.
that re-check after 100 or so miles is key though.
i sat there turning my bolts like i was putting them on for the first time.
now i check 'em once a week or so when i'm riding a lot.
that re-check after 100 or so miles is key though.
i sat there turning my bolts like i was putting them on for the first time.
now i check 'em once a week or so when i'm riding a lot.
Thread
Thread Starter
Forum
Replies
Last Post
