Tightening heel hooks/pads.
Thread Starter
|
Cruiser
Joined: Aug 2009
Posts: 130
Likes: 0
Tightening heel hooks/pads.
My wideglide has the pieces that bolt to the stock pegs, and i believe are called heel hooks/pads, where you set your heel when feet are on the pegs. my left side wants to work its way down when riding, but my right one is solid. how are these installed, and how can i tighten up my loose one? Thanks
Club Member
Joined: Feb 2008
Posts: 11,483
Likes: 39
From: Passaic County, NJ
Posting some photos of your set-up may help us to help you. 
Have you checked the footpeg to see if it's loose from the mount? I know my kury isopegs with stirrup have an allen bolt I can loosen to adjust peg pitch and stirrup pitch.
Have you checked the footpeg to see if it's loose from the mount? I know my kury isopegs with stirrup have an allen bolt I can loosen to adjust peg pitch and stirrup pitch.
Road Warrior
Joined: Sep 2006
Posts: 1,826
Likes: 87
From: Cookson, Ok
If they are Kuryakyns, take the peg off from the end with a 1/4" allen wrench and it will give you access to the rather large nut that holds the stirrup arm in position. It may take you a few tries to get the adjustment exactly where you want it.
Thread
Thread Starter
Forum
Replies
Last Post
