Planned new exhaust and A/C set up on Street Bob
Thread Starter
|
Cruiser
Joined: Jul 2006
Posts: 206
Likes: 0
From:
Planned new exhaust and A/C set up on Street Bob
Well I have had my 06 Street Bob for almost a month now and have been indecisive as to what exhaust and A/C system I should buy. I have finally decided to get the Vance and Hines Straightshot HS slip-ons and the Arlen Ness Big Sucker from American Classic Motors and the Power Commander III from Fuel Moto. I will be looking for a wrinkle black round cover for the A/C so the air cleaner is exposed. Does anyone else have a similar set-up they installed themselves. I'm okay installing the pipes and A/C, but a litlle nervous about the PC III. Fuel Moto says they will put a custom map into the PCIII based on my setup. I like the fact that kind of takes the guess work out of it for me. I'd also like to hear from anyone that has a good source for a plain wrinkle black round A/C cover. I'm looking for a plain cover (no crosses, skulls etc.)
Road Master
Joined: Dec 2005
Posts: 1,245
Likes: 0
From:
RE: Planned new exhaust and A/C set up on Street Bob
I took a wrinkle black round cover with a Maltese on it, flipped it over, lightly sanded it, and hit it with a can of flat black Krylon. I can always go back to the Maltese if I want. I paid $40 for the Maltese cover through ECE. I'm sure you could get him to ship you a plain wrinkle black round cover for less than that. If not, order a cheap one and do what I did.
Whiff
[IMG]local://upfiles/6795/D91B8795F8734AB5B27FE51625353BB8.jpg[/IMG]
Whiff
[IMG]local://upfiles/6795/D91B8795F8734AB5B27FE51625353BB8.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
