engine removal
it would be tight! i bet if you pulled the rockers it could! why paint the frame man? have it powder coated it will be a much stronger finish and look just as good if not better! you are goign to have to unblot the motor from the trans though to get it out
Thread Starter
|
Advanced
Joined: Dec 2009
Posts: 88
Likes: 0
From: GA
well ive got it worked out where a paint jobs not gonna cost me anything if it werent for that i would love to get it powdercoated. figgered as much as of the trans just didnt want to have to break the jugs loose prolly will get it p/c in a few years .thx for your help
Cruiser
Joined: Apr 2008
Posts: 108
Likes: 7
On my 02 dwg, I had plenty of room to yank it out... heads and all. 'Course.. you'll have to strip it of everything else... tank, carb, outer & inner primary's, most importantly, the battery box, starter, etc. For myself, I didn't try to take the trans and motor out still together.. but I think that too can be done. Once you get the battery box out of the way, you will have all kinds of room in there.
Edit: The motor is pretty freaking heavy by the way. Don't let it's "huggable" size fool you.
Edit: The motor is pretty freaking heavy by the way. Don't let it's "huggable" size fool you.
Last edited by hawkdsl; Jun 14, 2010 at 05:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lrntowrench
Frame/Suspension/Front End/Brakes
4
Jan 14, 2008 10:00 AM
