What does it take for fat front wheel/tire?
Thread Starter
|
Banned
Joined: Oct 2007
Posts: 1,579
Likes: 1
From: Ft. Hood, Texas
What does it take for fat front wheel/tire?
Which HD wheels are interchangable with a 06 Super Glide? 49 mm forks,
I believe it have a 1" axle
My concern is the brake caliper location on fork
I believe it have a 1" axle
My concern is the brake caliper location on fork
Road Master
Joined: Apr 2007
Posts: 1,123
Likes: 1
From: Dallas TX
you do have a one inch axle as far as wheels go i am not sure what would fit your bike that you can put a wider rim and tire in there. I have a night train front end on mine which is that same as the older wide glides and i put a ultra classic front and rear rim on my bike
Road Master
Joined: Apr 2007
Posts: 1,123
Likes: 1
From: Dallas TX
Yes if you wanted a fat bob style tire size i dont think it will fit in between your type front end but i am not sure on that because I have never tried it. I know that the wheels i have on right now are 6 1/2 inches from bearing race to bearing race through the hub as is the rear rim. My original bob rear rim was the same measurement so i was able to bole it right in with the same spacers and no mod to the rim or the bike. You might be able to put a little wider tire on the rim you have but it wont be like mine or like the wide tires on the front of the fat bob.
Thread
Thread Starter
Forum
Replies
Last Post
efexdeedoubleyougee
Dyna Glide Models
5
Apr 3, 2013 05:50 AM
E_V_A_N
Sportster Models
0
Aug 25, 2012 10:23 AM
