will these fit?

Reply Subscribe

Thread Tools

Search this Thread

Oct 30, 2010 | 03:51 PM

BftXJ

Thread Starter

Cruiser

Joined: Jul 2009

Posts: 176

Likes: 0

From: Columbia,SC

will these fit?

looking to change up my handlebars and was wondering if these would work with my stock risers and controls. i know i would have to do some cable legthing but any concerns?

http://cgi.ebay.com/ebaymotors/Wild-...item5d2bb42226

Oct 30, 2010 | 04:14 PM

Swede405

Tourer

Joined: Jul 2009

Posts: 455

Likes: 2

From: Dallas, TX

What bike do you have?

Oct 30, 2010 | 04:25 PM

BftXJ

Thread Starter

Cruiser

Joined: Jul 2009

Posts: 176

Likes: 0

From: Columbia,SC

haha that might help to know, 03 fxd super glide

Oct 30, 2010 | 04:41 PM

Swede405

Tourer

Joined: Jul 2009

Posts: 455

Likes: 2

From: Dallas, TX

Yes, they should fit with stock risers and controls. You may even be able to get away with your existing wires from the looks of it, but measure to make sure.

Oct 30, 2010 | 04:54 PM

BftXJ

Thread Starter

Cruiser

Joined: Jul 2009

Posts: 176

Likes: 0

From: Columbia,SC

the bars on there now have a 12 inch rise, and the new bars are 14

Oct 30, 2010 | 05:24 PM

Streetbob Bomber

Cruiser

Joined: Oct 2010

Posts: 142

Likes: 1

From: Scholfield BKS,Hawaii

Im puttin 16in on my FXDB from the oem 12in, and have to do cable extensions,, your new bars will fit the oem risers, and if your lucky you may be able to get away with the stock cables and wires since your only liftin 2in.

Oct 30, 2010 | 05:41 PM

dsiltman

Cruiser

Joined: May 2010

Posts: 188

Likes: 0

From: Pekin,IL

Those bars have been changed once before, looks like you should be able to get a couple of more inches out of those cables and brake lines. Question is how tight did they do the wiring. Was'nt payin attention, those look to be internally wired so you have to go through the wiring thing anyway.

Last edited by dsiltman; Oct 30, 2010 at 05:45 PM.