Project DRAG BOB..
Thread Starter
|
Road Captain
Joined: Aug 2008
Posts: 670
Likes: 5
From: NJ
Project FAST BOB..
So thats it finally made up my mind.. I am doing the motor all out and gonna make a blacked out fast as hell dyna Drag Bob.... I will be posting pics as I go and as I build my motor aswell So here is the list..
I am dumping the PC 5 and my Vance and Hines exhaust. I am going with the TTS for tuning and I am ordering the new RB Racing LSR 2 - 1 exhaust 2 inch in Black ceramic..
To Finish off my project Drag Bob I got all my stuff from the power coater . I need to lace up the spoke wheels I am doing black Rims and Hubs with silver spokes 16's front and rear. Gonna do the wide glide fender for the rear to finish off the look. As for suspension I am doing Ricor Shcoks in the rear and some Race Tech springs up front. Doing new speedo gonna go with the New dakota Digi for the Fat Bob with a digital Oil Pressure gauge aswell......
Motor:
Stage IV Heads done by Hillside Cycles
107 Kit by Hillside with Wiseco Forged Dome Top Pistons
Bob Woods TW8-6 cams
Barnett clutch pack
Screamin Eagle big twin compensator
HPI 55mm Throttle Body
HPI 5.3 GR Injectors
Screamin Eagle Push Rods
Custom made Velocity Stack by Wimmer Machine
What she looks like now...
I am dumping the PC 5 and my Vance and Hines exhaust. I am going with the TTS for tuning and I am ordering the new RB Racing LSR 2 - 1 exhaust 2 inch in Black ceramic..
To Finish off my project Drag Bob I got all my stuff from the power coater . I need to lace up the spoke wheels I am doing black Rims and Hubs with silver spokes 16's front and rear. Gonna do the wide glide fender for the rear to finish off the look. As for suspension I am doing Ricor Shcoks in the rear and some Race Tech springs up front. Doing new speedo gonna go with the New dakota Digi for the Fat Bob with a digital Oil Pressure gauge aswell......
Motor:
Stage IV Heads done by Hillside Cycles
107 Kit by Hillside with Wiseco Forged Dome Top Pistons
Bob Woods TW8-6 cams
Barnett clutch pack
Screamin Eagle big twin compensator
HPI 55mm Throttle Body
HPI 5.3 GR Injectors
Screamin Eagle Push Rods
Custom made Velocity Stack by Wimmer Machine
What she looks like now...
Last edited by Los11; Mar 14, 2011 at 08:52 PM.
Ultimate HDF Member
Joined: Nov 2009
Posts: 7,079
Likes: 20
From: Queens, NY
damn bro...you been hookin' on the side to pay for all this?! bwahahaha
glad you finally made up your mind.
one question though, seems like you're gonna be making some nice power, you sure spokes are the best option to run for wheels? seems like your wheels or some nice mags would handle the power better.
spokes do look nice though!
glad you finally made up your mind.
one question though, seems like you're gonna be making some nice power, you sure spokes are the best option to run for wheels? seems like your wheels or some nice mags would handle the power better.
spokes do look nice though!
Outstanding HDF Member
Joined: May 2007
Posts: 2,217
Likes: 23
From: Dutchess County NY
i agree with all the "no spoke" comments.
but sounds like you are going to have some fun with the bike.
but sounds like you are going to have some fun with the bike.
Trending Topics
Thread Starter
|
Road Captain
Joined: Aug 2008
Posts: 670
Likes: 5
From: NJ
damn bro...you been hookin' on the side to pay for all this?! bwahahaha
glad you finally made up your mind.
one question though, seems like you're gonna be making some nice power, you sure spokes are the best option to run for wheels? seems like your wheels or some nice mags would handle the power better.
spokes do look nice though!
glad you finally made up your mind.
one question though, seems like you're gonna be making some nice power, you sure spokes are the best option to run for wheels? seems like your wheels or some nice mags would handle the power better.
spokes do look nice though!