Idle adjustment
Thread Starter
|
Stage I
Joined: Jan 2011
Posts: 1
Likes: 0
From: Brooklet Georgia
Idle adjustment
I have a 2002 Dyna Wide Glide that seems to idle higher than it's suppose to after it warms up really good, usually after about 10 miles or so. It has a carb so does it sound like I need to adjust the idle screw? Where do I find it?
The idle screw is on the right side of the carburator, just behind the air cleaner.
It is in the upper right portion of this photo (zinc plated, looks like brass). The screw phyisically moves the idle pulley (holds the throttle and idle cables) to adjust the fuel mix. Once you find it, you will never forget it. The adjustment is simple and can be done with a phillips screwdriver, you do not even have to remove the air cleaner.
It is in the upper right portion of this photo (zinc plated, looks like brass). The screw phyisically moves the idle pulley (holds the throttle and idle cables) to adjust the fuel mix. Once you find it, you will never forget it. The adjustment is simple and can be done with a phillips screwdriver, you do not even have to remove the air cleaner.
Thread
Thread Starter
Forum
Replies
Last Post
Windseeker
EVO
7
Jul 4, 2019 07:44 PM
robjohnston
Sportster Models
5
Dec 8, 2006 07:45 PM
