Drag bars on dyna, what risers?
Thread Starter
|
Cruiser
Joined: Apr 2010
Posts: 150
Likes: 1
From: Arkansas
Ideally I want no risers and not much pullback at all.
I'm gonna go ahead and order the 32" drags and some top clamps and try to use my stock lower risers. If it hits the tank at that point, i'll look for the minimum rise i need to clear.
I'm gonna go ahead and order the 32" drags and some top clamps and try to use my stock lower risers. If it hits the tank at that point, i'll look for the minimum rise i need to clear.
Road Warrior
Joined: May 2010
Posts: 1,382
Likes: 4
From: Kennewick, WA
Sounds like a good approach. You might have to relocate the turn signals to the fork clamps if they hit, but that's easy to do. 32" drags are great.
Stage II
Joined: Feb 2012
Posts: 2
Likes: 0
From: Folsom CA
My apologies to the thread originator. I'm not trying to thread jack but apparently I can't send p.m's. Just wondering what seat you are running? I've done several searches including the Harley bike build site but can't find this info. Love the look of your bike and found it while searching about drag bars on a dyna. Possibly trading for a '99 lowrider soon. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
