Lets go Ape Hangers lets show them off!!!

Reply Subscribe

Thread Tools

Search this Thread

Jul 10, 2013 | 04:18 AM

#261

LagunaGlide

Road Master

Joined: May 2013

Posts: 1,053

Likes: 91

From: Harrisburg, PA

Quote:

Originally Posted by bikridr69

here are mine

What bars are these?

Jul 10, 2013 | 04:42 AM

#262

Scarfmace

Advanced

Joined: Apr 2012

Posts: 70

Likes: 0

From: Belgium

Here are mine 15"

Jul 10, 2013 | 06:06 AM

#263

LagunaGlide

Road Master

Joined: May 2013

Posts: 1,053

Likes: 91

From: Harrisburg, PA

Quote:

Originally Posted by nakbuc

I see some of you are having trouble feeding the wires through the bars. i used a shop-vac to suck a small rope up the bars then tied the rope around them and they pulled right through.

That is brilliant. Great idea there.

I am sure I missed the info somewhere as I am not a Search wizard, but can anyone tell me what the total rise is that you can still run the stock cables, or even just what size bars you can go up to and still use the stock cables? Also if you could include how much rerouting of the cables had to be done at this high points would be good too. Thanks

Jul 20, 2013 | 08:42 PM

#264

KUJOE

Cruiser

Joined: Sep 2010

Posts: 202

Likes: 0

From: LOS ANGELES

Here is mine 18 inch Carlini Gangsternull.jpg?t=1367770561

Jul 20, 2013 | 08:56 PM

#265

PigInaBlanket

Club Member

Joined: May 2006

Posts: 10,815

Likes: 16

From: Virginia

Quote:

Originally Posted by BlackburnD

I've got 14" on mine and the stock cables and brake line worked but they were stretched to their limit. I could have left them and it would have been fine, in fact I still have the stock throttle and idle cable. I replaced the clutch cable because I got a hell of a deal and I replaced the brake line mainly for looks and also braking performance.