RearSignal Wiring Question
I am replacing the rear signals on my 2010 FXDWG. Does anyone know the wiring? There is black, purple and blue wires, I need to know what each wire does. Thanks!
+1;
Not familiar with 2010 FXDWG wiring diagrams.
What I know from other dynas is:
blue is driving light
violet is power to left rear turn signal
brown is power to right rear turn signal
red/yellow is power to brake light
black is ground
Not familiar with 2010 FXDWG wiring diagrams.
What I know from other dynas is:
blue is driving light
violet is power to left rear turn signal
brown is power to right rear turn signal
red/yellow is power to brake light
black is ground
Black - Ground
Blue - Running
Brown/White - Right T/S , Brake
Violet/White - Left T/S , Brake
That is if you have the T/S/S Module (No Tail light)
Let me know if you do and I can check that.
Hope this helps. That is what is in the 2010 Service Manual
Blue - Running
Brown/White - Right T/S , Brake
Violet/White - Left T/S , Brake
That is if you have the T/S/S Module (No Tail light)
Let me know if you do and I can check that.
Hope this helps. That is what is in the 2010 Service Manual
Last edited by nichiowa; Feb 24, 2012 at 11:20 AM.
be very careful around the curcuit board in the tail light if you are around there-i was wiring in a lighted license plate and had a brain fart and shorted out a hot and ground and it cooked the curcuit-waiting for a new one to come in now
Trending Topics
take care with the wiring, if you get it *** backwards you can blow your instrument fuse.
Which in itself is not a big deal, unless you miss checking it multiple times and wrongly diagnose that you fried the TSSM.....
dont ask me how i know.....
Which in itself is not a big deal, unless you miss checking it multiple times and wrongly diagnose that you fried the TSSM.....
dont ask me how i know.....
Thread
Thread Starter
Forum
Replies
Last Post
Techknowguy
Dyna Glide Models
14
May 10, 2010 09:33 PM
1986FXST
Ignition/Tuner/ECM/Fuel Injection
0
Jun 4, 2008 03:31 PM











