2012 Wide Glide shocks ?
Road Master
Joined: Apr 2012
Posts: 1,229
Likes: 240
From: On 2 rails...
Just a thought, when I got my bike the preloads on the shocks were set at the lowest level. Bringing them up a few notches really helped the ride.
Of course in your case being 100# over the max you might have to bring them to full preload.
Of course in your case being 100# over the max you might have to bring them to full preload.
Stellar HDF Member
Joined: Apr 2010
Posts: 3,430
Likes: 239
From: northeast
shock spanner wrench
http://www.harley-davidson.com/gma/g...bmLocale=en_US
you can also use one of those rubber oil filter wrenches if you have one.
remember to always go clock wise though even when going to a lower number as it is much harder to crank backwards.. IE you are at 3 and want to go to 2... keep going clickwise to 4-5 and it will pop back to 1 and then 2..
http://www.harley-davidson.com/gma/g...bmLocale=en_US
you can also use one of those rubber oil filter wrenches if you have one.
remember to always go clock wise though even when going to a lower number as it is much harder to crank backwards.. IE you are at 3 and want to go to 2... keep going clickwise to 4-5 and it will pop back to 1 and then 2..
Road Captain
Joined: Mar 2011
Posts: 564
Likes: 11
From: Long Island, Suffolk County
I have them on my 2011 WG and I like them a lot. I weight 175lbs and never ride two up. I have not had any issues with these shocks and no mods were needed to make them work.
Thread
Thread Starter
Forum
Replies
Last Post
harley_rider77
Dyna Glide Models
15
May 24, 2012 09:15 PM
