FatBob drag bar help
Thread Starter
|
Tourer
Joined: Aug 2006
Posts: 465
Likes: 1
From: Long Beach, CA
FatBob drag bar help
So I ran into a problem doing the internal throttle - seems the inside diameter of the stock FatBob bars is non standard (and too thin) for the internal throttle to work.
So my options are:
I've decided on #2
Problem is, I like the stock bars and so I was hoping to find some replacement that more or less mimics the stock configuration - don't really need extra height and or pullback
According to their website, looks like the burly slammer drag bars won't work.
One of the other bars I'm looking at are the Carlini clean sweeps 1.25" Anybody know if these will work? It seems like they'd be pretty close to stock.
Anyboy have any other suggestions?
Thanks
Jack
So my options are:
- scrap the internal throttle idea
- go with different bars
I've decided on #2
Problem is, I like the stock bars and so I was hoping to find some replacement that more or less mimics the stock configuration - don't really need extra height and or pullback
According to their website, looks like the burly slammer drag bars won't work.
One of the other bars I'm looking at are the Carlini clean sweeps 1.25" Anybody know if these will work? It seems like they'd be pretty close to stock.
Anyboy have any other suggestions?
Thanks
Jack
Bars
Thread Starter
|
Tourer
Joined: Aug 2006
Posts: 465
Likes: 1
From: Long Beach, CA
Thread
Thread Starter
Forum
Replies
Last Post
columbia whaler
Dyna Glide Models
5
Mar 10, 2015 06:52 PM
