t-bars tall risers gauge mount question

Reply Subscribe

Thread Tools

Search this Thread

May 16, 2012 | 11:50 AM

jslum

Thread Starter

Tourer

Joined: Aug 2011

Posts: 321

Likes: 0

From: so fl

t-bars tall risers gauge mount question

anybody ever use frame clamps like for clutch cables instead of the accutronics gauge mount to relocate gauges? there a lot cheaper just wondering if it will work

May 16, 2012 | 12:07 PM

Hogpro

Former Sponsor

Joined: Aug 2005

Posts: 10,968

Likes: 54

I just did that on mine. Clamps are $12.95 each, the Accutronix mount is ab out $100 or so. Here are a few pics.

May 16, 2012 | 12:11 PM

Patman 13

Intermediate

Joined: Apr 2012

Posts: 34

Likes: 0

From: North Apollo, Pa

Yep. I did it too. Has worked well for me.

May 16, 2012 | 12:43 PM

lk3k9

Intermediate

Joined: Mar 2012

Posts: 30

Likes: 0

From: New York

I did it as well, works great.

May 16, 2012 | 12:52 PM

gartec81

Grand HDF Member

Joined: May 2010

Posts: 4,356

Likes: 887

From: san diego

how hard is it to hook up a tach. my street bob didnt come with one. what do I do then?

May 16, 2012 | 01:12 PM

Hogpro

Former Sponsor

Joined: Aug 2005

Posts: 10,968

Likes: 54

You need the tach and the bracket for the speedo and tach. I am not sure where it plugs in but it can't be that difficult to do.

Here is a thread ab out doing it.
https://www.hdforums.com/forum/dyna-...er-needed.html

and here is a list of part numbers.
67121-95 gauge gasket
48073-04 dual gauge clamp
2361 screw (2 each, to hold tach into above clamp)
72131-04 socket housing, 12-way(gray)
72189-04 seal pin (10)
74196-04 terminal, socket (14)
74197-04 socket lock, secondary, 12-way

seal pin (10) & terminal, socket (14)....quantity is listed for both gauges, count the pins on the gauge to see how many you will need for the tach.
__________________