Help With Bars
Thread Starter
|
6th Gear
Joined: May 2012
Posts: 13
Likes: 0
From: Yakima, WA
Help With Bars
Hey all, first time posting! Got my first cruiser after making the switch from multiple street bikes... never been happier!!
So here's my question, I've been searching and haven't really found a solid answer. I bought my '06 Street Bob with 4" risers and I'm guessing the stock apes. I want to take off the risers and run some 16" apes. I don't want to run a riser at all and would much rather have all bars instead.
Will this work??
Clamp
http://www.cruisercustomizing.com/cu...CUSTOMC-648007
Bars
http://www.ebay.com/itm/16-ape-hange...23baf1&vxp=mtr
Will I need any extra hardware to mount these up?
Thanks in advance for any help!
So here's my question, I've been searching and haven't really found a solid answer. I bought my '06 Street Bob with 4" risers and I'm guessing the stock apes. I want to take off the risers and run some 16" apes. I don't want to run a riser at all and would much rather have all bars instead.
Will this work??
Clamp
http://www.cruisercustomizing.com/cu...CUSTOMC-648007
Bars
http://www.ebay.com/itm/16-ape-hange...23baf1&vxp=mtr
Will I need any extra hardware to mount these up?
Thanks in advance for any help!
Advanced
Joined: Jun 2011
Posts: 85
Likes: 0
Hey all, first time posting! Got my first cruiser after making the switch from multiple street bikes... never been happier!!
So here's my question, I've been searching and haven't really found a solid answer. I bought my '06 Street Bob with 4" risers and I'm guessing the stock apes. I want to take off the risers and run some 16" apes. I don't want to run a riser at all and would much rather have all bars instead.
Will this work??
Clamp
http://www.cruisercustomizing.com/cu...CUSTOMC-648007
Bars
http://www.ebay.com/itm/16-ape-hange...23baf1&vxp=mtr
Will I need any extra hardware to mount these up?
Thanks in advance for any help!
So here's my question, I've been searching and haven't really found a solid answer. I bought my '06 Street Bob with 4" risers and I'm guessing the stock apes. I want to take off the risers and run some 16" apes. I don't want to run a riser at all and would much rather have all bars instead.
Will this work??
Clamp
http://www.cruisercustomizing.com/cu...CUSTOMC-648007
Bars
http://www.ebay.com/itm/16-ape-hange...23baf1&vxp=mtr
Will I need any extra hardware to mount these up?
Thanks in advance for any help!
What you showed was the top cap of a riser. I have low 1.5 in riser w/o a cap but you should have one.. I will sell my low riser if interested.
A pic of what you have would help. I see ur new to the HD's.. Welcome.. I was there at one point
Hey all, first time posting! Got my first cruiser after making the switch from multiple street bikes... never been happier!!
So here's my question, I've been searching and haven't really found a solid answer. I bought my '06 Street Bob with 4" risers and I'm guessing the stock apes. I want to take off the risers and run some 16" apes. I don't want to run a riser at all and would much rather have all bars instead.
Will this work??
Clamp
http://www.cruisercustomizing.com/cu...CUSTOMC-648007
Bars
http://www.ebay.com/itm/16-ape-hange...23baf1&vxp=mtr
Will I need any extra hardware to mount these up?
Thanks in advance for any help!
So here's my question, I've been searching and haven't really found a solid answer. I bought my '06 Street Bob with 4" risers and I'm guessing the stock apes. I want to take off the risers and run some 16" apes. I don't want to run a riser at all and would much rather have all bars instead.
Will this work??
Clamp
http://www.cruisercustomizing.com/cu...CUSTOMC-648007
Bars
http://www.ebay.com/itm/16-ape-hange...23baf1&vxp=mtr
Will I need any extra hardware to mount these up?
Thanks in advance for any help!
You can go with smaller risers, That part from cruiser customizing looks like just a top clamp, try these they are the shortest risers I found
http://www.ebay.com/itm/Black-Shorty...r#ht_975wt_922
I hope this helps out
Thread Starter
|
6th Gear
Joined: May 2012
Posts: 13
Likes: 0
From: Yakima, WA
Thanks guys, I just pulled up those shorty risers. I ran home to peek at my current setup and realized I would need a lower riser. I am gonna order those black shorty's on ebay today. Thanks for the help! Much MUCH happier on a Harley.
Ultimate HDF Member
Joined: Jun 2010
Posts: 5,105
Likes: 16
From: Blaine, WA
I was going to say that, seems like everyone that has that top clamp wants to get rid of it so you can probably get one at no cost - take him up on the offer.
Trending Topics
Road Warrior
Joined: May 2006
Posts: 1,535
Likes: 42
From: Bossier City, LA
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Thread Starter
|
6th Gear
Joined: May 2012
Posts: 13
Likes: 0
From: Yakima, WA
So now I'm thinking I'm about to run into another problem, Ordered 16" apes. Have Shorty 1" risers. Didn't think about the cable situation, I have 4" risers and 10" mini apes, plenty of slack and play on my cables.. will going 16" screw me over and will I need a whole new cable kit?
Thread
Thread Starter
Forum
Replies
Last Post
Jason Williams
Dyna Glide Models
5
Jul 21, 2017 12:37 PM
83_Shovelhead_Old_School
Softail Models
6
May 18, 2012 05:49 PM