So i have a 2012 widw glide, vance and hines short shots, se heavy breather and power vision. Bike has 800 miles on it. So got on the bike today for a short ride. Stopped by an ATM and bike idled for 3 min and when I got back on the check engine light was on. Hooked up the power vision and pulled the code p0154 for an open or unresponsive rear o2 sensor. Traced the wires are it is hooked up correctly and no kinks or bends. Any ideas?

 

Trying clearing it and see if it replicates.

 

I cleared it with the power vision but going to try a clear on the bike itself as soon as I get home. Having to help the wife set up her classroom for the school year

 

Cleared it again on the bike and check engine light came back on with the same code. Will this cause damage to the bike or do I need to park it untill I can get it to the dealer.

 

If your O2 sensor is conntected to a tuner, I would take the tuner out of the loop and see if that is the cause of your problem.

 

I Think I may have a bad o2 sensor. I hooked up the power vision and logged the front and rear o2 sensor v ranges. Front stayed from 0-.9 and the rear was at a steady 5 v