My Dyno Chart

Reply Subscribe

Thread Tools

Search this Thread

Nov 27, 2012 | 07:47 AM

gguerra988

Thread Starter

6th Gear

Joined: May 2010

Posts: 14

Likes: 0

My Dyno Chart

Hi everyone, hope everyone is doing great.
I have a 2010 Wide Glide, I have not cats in Tomygun head exhaust rush pipes with 2 inch baffles and a K&N air cleaner and a Screaming Eagle Tuner..

Ok, here is my Dyno Chart....can someone help me undersstand this, Is this a Good Dyno reading????

Attached Thumbnails

Last edited by gguerra988; Nov 27, 2012 at 07:58 AM.

Nov 27, 2012 | 08:07 AM

junior07

Road Master

Joined: Oct 2009

Posts: 1,109

Likes: 89

From: Tampa, FL

with what you have done, i would say those are good numbers. looks like about 90 f*p torque and about 78 hp.

to get more you will need to upgrade the cams.

.

Nov 27, 2012 | 10:54 AM

dyna rider

Club Member

Joined: Dec 2007

Posts: 4,192

Likes: 168

From: Knoxville, Tn

Dyno Sheet

The red lines are the first run before tuning and with the stock setting on the rev limiter. The blue lines are the second run after tuning and with the rev limiter raised 5500 to 6200. Very respectable numbers for no more than you have done to it...Are you happy with the way it runs ?

Nov 27, 2012 | 01:08 PM

Foxster

Road Warrior

Joined: Apr 2010

Posts: 1,739

Likes: 10

From: Suffolk, England

Yup, pretty respectable numbers for stage-1 and the air-fuel ratio looks tidy too - not too stupidly rich, a good compromise.

I'd say that was money well spent.

Nov 27, 2012 | 01:12 PM

gguerra988

Thread Starter

6th Gear

Joined: May 2010

Posts: 14

Likes: 0

Quote:

Originally Posted by dyna rider

Thanks for th education, alot better than the HD stealers have done....I am very happy the way it runs....Thank again for the response.

Last edited by gguerra988; Nov 27, 2012 at 01:17 PM.

Nov 27, 2012 | 01:15 PM

gguerra988

Thread Starter

6th Gear

Joined: May 2010

Posts: 14

Likes: 0

I wanna thank everyone for replying, again i am always greatfull to you guys....sometime the stealers just twist things to get you to spend money, Just dont trust them....Thank God for trusted guys like you....

Nov 27, 2012 | 06:32 PM

ace2001

Cruiser

Joined: May 2009

Posts: 175

Likes: 0

From: Oceanside, CA

Yeah those are definitely respectable. I just had my bike dyno'd the other day and ran 72hp and 83 ft-lbs. I have a 96" with V&H Competition Series, SE Stage 1 a/c and a fuel pack. I only ran the bike to get a baseline of where I am before I start doing mods to the motor. The pipe and fuel pack are going to get ditched and I'm going to get cams, TTS and a longer 2-1 pipe for now. I might even get the heads ported.